forums.sketchup.com Opening: Creating a Simple Flat Roof in SketchUp SketchUp is a fantastic tool for 3D modeling, and creating a flat roof is one of the fundamental skills you'll need. This step-by-step guide will walk you through the process of making a basic flat roof using SketchUp's core tools. We'll assume you already have a building structure created in SketchUp that needs a roof.
Step 1: Select the Roof Area Start by identifying the edges that define the perimeter of your roof. Usually, this will be the top edges of your building's walls. Make sure these edges form a closed loop, meaning they connect seamlessly to each other.
Step 2: Use the Rectangle Tool Activate the Rectangle tool (found in the toolbar or by pressing the 'R' key). Click on one corner of the roof perimeter. Move the cursor to the opposite corner of the roof perimeter, creating a rectangle that encompasses the entire roof area. Make sure the rectangle aligns perfectly with the existing walls. If the surface doesn't fill in, there is a gap between your edges and you need to go back and fix it before continuing.
Step 3: Verify Surface Creation SketchUp should automatically create a face (a surface) within the rectangle you just drew. If the face *doesn't* appear (it remains just a set of lines), it indicates that the perimeter edges are not perfectly coplanar (on the same plane) or that there might be tiny gaps between them. You will need to zoom in and carefully examine all the corners and lines to find and fix any issues, using the Line tool (L) to close small gaps or the Move tool (M) to bring non-coplanar edges into the same plane.
Step 4: Adding Overhang (Optional) If you want an overhang, use the Offset tool. You can find it in the toolbar, or press "F". Click on the face of the roof you just created. Move your cursor outwards to define the desired overhang distance. Type in the specific distance (e.g., "30cm" or "1ft") and press Enter for a precise overhang. This will create a new, larger face. If you want a specific overhang for only one side, use the Line tool. Draw a line from the original edge, type in the desired overhang distance (e.g., "30cm" or "1ft") and press Enter. Do this for all four sides and connect all corners to make the overhanging roof.
Step 5: Adding Thickness (Optional) Use the Push/Pull tool (found in the toolbar or by pressing the 'P' key). Click on the face of the roof. Move your cursor upwards (or downwards) to give the roof a thickness. Type in the desired thickness (e.g., "15cm" or "6in") and press Enter.
Step 6: Adding Details (Optional) You can add further details, such as parapets (low walls around the edge of the roof), drainage systems, or skylights, using SketchUp's various tools. These additions depend entirely on the complexity and design of your roof.
Conclusion: Your Basic Flat Roof You've now created a basic flat roof in SketchUp. Remember to group your roof elements (Select > Right-click > Make Group) to keep your model organized and prevent accidental modifications. Experiment with different thicknesses, overhangs, and details to achieve the desired look for your building.
How To Make A Roof In Google Sketchup
www.sketchup-ur-space.com Change A Flat Roof To A Gabled Roof
forums.sketchup.com A Small House With The Words Flat Roof Design On It's Front And Side
www.pinterest.co.kr
0 komentar:
Posting Komentar